Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 326

fddCfg fddCfg Manages the fabric data distribution configuration parameters. Synopsis fddcfg --showall fddcfg --localaccept policy_list fddcfg --localreject policy_list fddcfg --fabwideset policy_list Description Use this command to manage the fabric data distribution configuration parameters. These parameters control the fabric-wide consistency policy. Switches can be locally configured to allow or reject a security policy. Supported policies include the following: SCC Switch Connection Control policy DCC Device Connection Control policy SCC Switch Connection Control policy PWD Password policy FCS Fabric Configuration Server policy PWD Fabric Element Authentication policy IPFILTER IP Filter policy Automatic distribution of a fabric-wide consistency policy is limited to SCC, DCC, and FCS policies. Use the --fabwideset parameter to enforce these policies fabric-wide in tolerant or strict mode, In strict mode, fabric-wide enforcement of FCS consistency policy is possible in mixed fabrics. However, switches that do not support the policies ignore them. Notes When a policy is set to strict mode, the manual distribution of the policy is not allowed. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: --showall Displays the accept/reject configuration of all policy sets and the fabric-wide consistency policy on the switch. 302 Brocade Fabric OS Command Reference 53-1004112-02