Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 885
FICON Max Read Pipe
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 885 highlights
portShow Configured Comm Rates: 2000000 / 5000000 kbps Peer Comm Rates : 2000000 / 5000000 kbps Actual Comm Rates : 2000000 / 5000000 kbps Keepalive (Cfg/Peer) : 1000 (1000 / 1000) ms Metric : 0 Connection Type : Default ARL-Type : Reset PMTU : Disabled SLA : (none) Failover Group : 0 VLAN-ID : NONE L2Cos (FC:h/m/l) : 0 / 0 / 0 (Ctrl:0) L2Cos (IP:h/m/l) : 0 / 0 / 0 DSCP (FC:h/m/l) : 0 / 0 / 0 (Ctrl:0) DSCP (IP:h/m/l) : 0 / 0 / 0 cfgmask : 0x40000000 0x00013c2f Flow Status : 0 ConCount/Duration : 1 / 33m59s Uptime : 48m53s Stats Duration : 33m59s Receiver Stats : 405861508 bytes / 2203591 pkts / 277.52 KBps Avg Sender Stats : 103974966684 bytes / 13967780 pkts / 71.62 MBps Avg TCP Bytes In/Out : 1503305492 / 107273625304 ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0 RTT (min/avg/max) : 1 / 1 / 1 ms Wan Util : 24.1% To display TCP connections for the circuits on the tunnel: switch:admin> portshow fciptunnel 8/27 -circuit Tunnel: VE-Port:8/27 (idx:11, DP1) Oper State : Online TID : 219 Flags : 0x00000000 IP-Extension : Disabled Compression : None QoS BW Ratio : 50% / 30% / 20% Fastwrite : Enabled Tape Pipelining : Read/Write IPSec : Disabled Load-Level (Cfg/Peer): Failover (Failover / Failover) Local WWN : 10:00:00:05:33:e7:d2:13 Peer WWN : 10:00:00:05:33:65:a8:05 RemWWN (config) : 00:00:00:00:00:00:00:00 FICON : Enabled XRC : Enabled Tape Pipelining : Read/Write Read Block id : Enabled Tin Tir : Enabled DevAck : Enabled Tera Read : Disabled Tera Write : Disabled Print : Disabled FICON Max Read Pipe : 32 FICON Max Write Pipe : 32 FICON Max Read Devs : 16 FICON Max Write Devs : 16 FICON Write Timer : 300 Brocade Fabric OS Command Reference 861 53-1004112-02