Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 76

aliCreate aliCreate Creates a zone alias. Synopsis alicreate "aliName","member[; member...]" Description Use this command to create a new zone alias. The zone alias member list must have at least one member (empty lists are not allowed). The alias member list cannot contain another zone alias. Refer to the zoneCreate command for more information on name and member specifications. This command changes the defined configuration. For the change to become effective, enable the zone configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the zone configuration to nonvolatile memory with the cfgSave command. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands Examples The following operands are required: "aliName" Specify a name for the zone alias, in double quotation marks. A zone alias name must begin with a letter and can be followed by any number of letters, numbers, and underscore characters. Names are case-sensitive. For example, "Ali_1" and "ali_1" are different zone aliases. Spaces are ignored. "member" Specify a member or list of members to be added to the alias, enclosed in double quotation marks. Members must be separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port index pair. Use switchShow for a list of valid port index numbers. • A world wide name (WWN). To create a zone alias defined by domain and port index pairs: switch:admin> alicreate "array1", "2,32; 2,33; 2,34" To create a zone alias with one member defined by WWN. switch:admin> alicreate "array2", "21:00:00:20:37:0c:66:23" SEE ALSO aliAdd, aliDelete, aliRemove, aliShow 52 Brocade Fabric OS Command Reference 53-1004112-02