Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 241
fabricLog, Exchange Fabric Parameters EFP is waiting for last Accept Frame ACC from flood.
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
fabricLog fabricLog Displays (all users) or manipulates (admin) the fabric log. Synopsis fabriclog -s | --show [dport] fabriclog -c | --clear [dport] fabriclog -d | --disable fabriclog -e | --enable fabriclog -h | --help Description Use this command to display, clear, disable, or enable the fabric log. When used with the --show option, this command displays the following information: Time Stamp Time of the event in the following format HH:MM:SS:MS. Input and *Action Fabric log message. An asterisk (*) in the message indicates an action. The link reset information is indicated by LR_IN and LR_OUT. LR_IN indicates a link reset on the remote switch, whereas LR_OUT indicates a link reset on the local switch. S Current switch state. Valid switch states include the following: FO Build Fabric (BF) received. F1 Reconfigure Fabric (RCF) is not supported. F2 Exchange Fabric Parameters (EFP) is waiting for last Accept Frame (ACC) from flood. F3 Flood EFPs. D0 The switch is the principal switch. D1 The principal switch is sending Domain ID Assigned (DIA). D2 The principal switch is waiting for Request Domain ID (RDI). D3 The principle switch is processing the RDI. A0 The switch is not the principal switch. Brocade Fabric OS Command Reference 217 53-1004112-02