Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 183
Fabric OS, Administrator's Guide, Chassis SDDQ Limit
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
configureChassis 0 Clears any previously configured CS_CTL to VC mapping and sets one-to-one mapping between a CS_CTL value and VC number for 8 Gbps-capable and 16 Gbps-capable ASIC. The CS_CTL values are divided into three groups: 1-8 (low priority), 9-16 (medium priority), and 17-24 (high priority). This is the default mode. 1 Sets the CS_CTL to VC mapping to support three CS_CTL values: 1 (low priority), 2 (medium priority), and 3 (high priority). Each CS_CTL value can map to more than one VC depending on the underlying support from ASIC. This is the auto mode. For more information about CS_CTL-based frame prioritization, refer to the Fabric OS Administrator's Guide. Chassis SDDQ Limit Specifies the number of user ports that can be quarantined in the chassis or unit. Valid values are 0 through 32. The default value is 10. The slow drain device quarantine (SDDQ) feature automatically isolates the slow-drain flows to a low priority VC from the existing VC (medium or high) thus freeing up the resources for the regular flows in the existing VC. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To add a suffix to the uploaded file name: switch:admin> configurechassis Configure... cfgload attributes (yes, y, no, n): [no] y Enforce secure config Upload/Download (yes, y, no, n): [no] Add Suffix to the uploaded file name (yes, y, no, n): [no] y Do you want to enable auto firmwaresync (yes, y, no, n): [no] Custom attributes (yes, y, no, n): [no] system attributes (yes, y, no, n): [no] fos attributes (yes, y, no, n): [no] To change the CS_CTL-based frame prioritization to default mode (one-to-one mapping): switch:admin> configurechassis Configure... cfgload attributes (yes, y, no, n): [no] Custom attributes (yes, y, no, n): [no] system attributes (yes, y, no, n): [no] fos attributes (yes, y, no, n): [no] y CSCTL QoS Mode (0 = default; 1 = auto mode): (0..1) [1] 0 Chassis SDDQ Limit: (0..32) [10] Brocade Fabric OS Command Reference 159 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/183.png)