Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 323

fcrXlateConfig Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Information displayed is not related to the entire backbone. The FC Router displays only connections to an edge fabric for which there are translate domain IDs. Any changes you intend to make using this command should be issued on the switches to which the edge fabrics are directly attached. In a Virtual Fabric environment, this is the base switch. Operands This command has the following operands: fcrxlateconfig Sets the preferred domain ID (1-239) to preferredDomainID for the translate phantom domain and saves the configuration persistently. The translate domain must be inactive to set the preferred domain ID. The following operands are required: importedFID Specifies the fabric ID (1 through 128) of the fabric that contains the translate domain. exportedFID Specifies the fabric ID (1 through 128) of the remote fabric represented by this translate domain. preferredDomainID Specifies the preferred domain ID (1 through 239) of the translate phantom domain. --remove | -r Removes the preferred domain ID of the translate phantom domain. The translate domain must be inactive to remove the preferred domain ID. The following operands are required: importedFID Specifies the fabric ID (1 through 128) of the fabric that contains the translate domain. exportedFID Specifies the fabric ID (1 through 128) of the remote fabric represented by this translate domain. preferredDomainID Specifies the preferred domain ID (1 through 239) of the translate phantom. --enable persistxd Enables translate domain persistence. When persistxd is enabled, the translate domain is created based on the persistent translate domain ID configuration. If a valid persistent translate domain ID is configured for a given importedFID and exportedFID pair, a translate domain for the exportedFID is created, even if no devices need to be imported or exported across the edge fabrics represented by importedFID and exportedFID. By default, persistxd is enabled. --disable persistxd Disables translate domain persistence. When persistxd is disabled, the translate domain is not created, even if a valid persistent translate domain ID is configured for the importedFID and exportedFID pair, so long as no devices are imported or exported across the edge fabrics represented by importedFID and exportedFID. Once devices need to be imported or exported across the edge fabrics, the translate domain is created. Brocade Fabric OS Command Reference 299 53-1004112-02