Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 814

portLogDump portLogDump Displays the port log without page breaks. Synopsis portlogdump [count[, saved]] Description Use this command to display the port log, listing all entries in the log without page breaks. This command displays the same information as portLogShow, but portLogShow prompts you to press Enter between each page. For an explanation of the information displayed by this command, refer to the portLogShow command. If the port log is disabled while this command is executed, a warning message is displayed. Refer to the portLogClear command for more information. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: count Specifies the maximum number of lines to be displayed. Only the most recent count entries are displayed. This operand is optional. saved Specify a nonzero value to display the saved port log from the last switch fault. Refer to upTime for conditions that cause a fault. The operand count is ignored when displaying the saved log. This operand is optional. Examples To display 10lines of the portlog on a Brocade DCX: switch:user> portlogdump 10 time task event port cmd args Mon Nov 16 21:52:15 2009 21:52:15.214 FCPH seq 106 7f0 ed210000,00000000,000073ee,10010082,00008000 21:52:15.214 PORT Tx3 106 2032 \ 02fffffd,00fffffd,0701ffff,13010000 21:52:15.216 FCPH read 106 2032 03fffffd,00fffffd,00000000,00008000,07010000 21:52:15.216 FCPH seq 106 7f0 ed980000,07010000,00004143,0004001c,00008000 21:52:15.216 FCPH write 106 2032 00fffffd,00fffffd,00000000,00008000,00000000 21:52:15.216 FCPH seq 106 7f0 ed210000,00000000,000073ee,10010082,00008000 21:52:15.216 PORT Tx3 106 2032 \ 02fffffd,00fffffd,06feffff,13010000 21:52:15.218 FCPH read 106 2032 790 Brocade Fabric OS Command Reference 53-1004112-02