Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 670
Failover Group ID: Not Config/Active, L2CoS: VLAN Not Con d
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 670 highlights
portCfg switch:admin> portcfg fcipcircuit 1/12 create 1 192.168.50.61 192.168.51.68 -b 300000 -B 500000 Operation succeeded To display circuit 1: switch:admin> portshow fcipcircuit 1/12 1 Circuit ID: 1/12.1 Circuit Num: 1 Admin Status: Enabled Oper Status: In Progress Remote IP: 192.168.51.61 Local IP: 192.168.51.68 Metric: 0 Failover Group ID: (Not Config/Active) Min Comm Rt: 300000 Max Comm Rt: 500000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 1000 Path MTU Disc: 0 VLAN ID: (Not Configured) L2CoS: (VLAN Not Configured) DSCP: F: 0 H: 0 M: 0 L: 0 Flags: 0x00000000 To set the compression rate to 'moderate' on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify -c moderate Operation succeeded To enable FICON XRC and Teradata emulation on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify \ --ficon-xrc enable --ficon-tera-read enable --ficon-tera-write enable Operation succeeded To enable printer emulation on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify \ --ficon-print enable Operation succeeded To configure FCIP FastWrite and Tape Pipelining on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify -f enable -t enable Operation succeeded To set the bandwidth distribution mode to "protocol" and adjust the FC and IP bandwidth ratios for an IP-Extension enabled tunnel on a Brocade 7840 switch: switch:admin> portcfg fciptunnel 24 create --distribution protocol,60,40 Operation succeeded 646 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/670.png)