Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 78

aliRemove aliRemove Removes a member from a zone alias. Synopsis aliremove "aliName","member[; member...]" Description Use this command to remove one or more members from an existing zone alias. If all members are removed, the zone alias is deleted. This command changes the defined configuration. For the change to become effective, enable the zone configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the zone configuration to nonvolatile memory with the cfgSave command. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: "aliName" Specify the name of the zone alias from which members are to be removed in double quotation marks. This operand is required. "member" Specify a member or list of members to be removed from the alias. The list must be enclosed in double quotation marks. Members must be separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port index number pair. Use switchShow for a list of valid port index numbers. • A world wide name (WWN) The member list is located by an exact string match; therefore, it is important to maintain the order when removing multiple members. For example, if a zone alias contains"1,2; 1,3; 1,4", then removing"1,3; 1,4" succeeds but removing"1,4; 1,3" fails. Examples To remove a world wide name from"array1": switch:admin> aliremove "array1", "3,5" switch:admin> aliremove "array1", "21:00:00:20:37:0c:76:8c" switch:admin> aliremove "array1", "0xEF" SEE ALSO aliAdd, aliCreate, aliDelete, aliShow 54 Brocade Fabric OS Command Reference 53-1004112-02