Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 340
ficonCupShow, Programmed offline state control
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
ficonCupShow ficonCupShow Displays FICON-CUP parameters for a switch. Synopsis ficoncupshow fmsmode ficoncupshow modereg [bitname] ficoncupshow MIHPTO ficoncupshow DD_LOG ficoncupshow diag_info ficoncupshow hlthchk_log ficoncupshow LP Description Use this command to display FICON-CUP (Control Unit Port) parameters for a switch. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: fmsmode Display the FICON Management Server (FMS) mode for the switch. modereg Display the FICON-CUP mode register. If no operand is specified, all mode register bit settings are displayed. If a mode register bit name is specified, then only the value of that bit is displayed. A value of 1 indicates that a given mode register bit is set, and 0 indicates that it is not set. The following operand is optional: bitname Displays the specified mode register bit as either set (1) or not set (0). Valid values for bitname include the following: POSC Programmed offline state control UAM User alert mode ASM Active=saved mode DCAM Director clock alert mode ACP Alternate control prohibited 316 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/340.png)