Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1132

topologyShow Out Port The port to which incoming frames are forwarded to reach the destination domain. In Ports The input ports that use the corresponding out port to reach the destination domain. This is the same information provided by portRouteShow and uRouteShow but in a different format. Total Bandwidth The maximum bandwidth of the out port. A bandwidth that is less than 0.512 Gbps is adjusted to the nearest power of 2 value. A bandwidth in the range of 0.512 Gbps (included) to 1 Gbps (not included) is adjusted to the 0.512 Gbps value. No adjustment takes place if the bandwidth is greater or equal to 1 Gbps. Bandwidth Demand The maximum bandwidth demand by the in ports. Flags Always D, indicating a dynamic path. A dynamic path is discovered automatically by the FSPF path selection protocol. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands The following operand is optional: domain Specify the destination domain for which to display the topology information. index Display port index numbers instead of slot or port numbers in the output. nopage Disables the paging format to display the output. Examples To display the topology on a single switch: domain is local, details are not displayed. switch:user> topologyshow 1 domains in the fabric; Local Domain ID: 97 When executed from an edge fabric, topologyshow displays details for all domains, including local domains and local translate domains: switch:user> topologyshow 6 domains in the fabric; Local Domain ID: 7 Domain: Metric: Name: Path Count: 1 10500 fcr_xd_1_1 1 Hops: Out Port: In Ports: 2 11 0 1 2 3 4 5 6 7 8 9 15 1108 Brocade Fabric OS Command Reference 53-1004112-02