Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1107

switchShow comment Optionally displays one of the following: Copper or Optical Displays which GbE port is currently active: Copper indicates that the RJ45 GbE port is currently active. Only copper connections are accepted (default). Optical indicates that the currently active GbE port accepts both copper and optical connections (SFPs). This parameter is set by the portCfgGeMediaType command, and applies only to the ge0 and ge1 ports on the Brocade 7800. Disabled The port is disabled. Port disable reasons may be stated in parenthesis: Disabled (FMS Mode) The port is disabled and in Ficon Server Management mode. Disabled (No area available for PID assignment) The port is disabled because a PID could not be assigned for the stated reason. Disabled (persistent) disable reason This port has been disabled with the portCfgPersistentDisable command. Disabled (Persistently disabled port) disable reason This port has been disabled for unspecified reasons. Disabled (Fabric Vision License required) This D_Port has been disabled because the Fabric Vision license is not installed on the switch. Disabled (Insistent Domain ID) This port has been disabled because the switch did not get the requested domain ID. Disabled (EX_Port IR POD License Limit Exceeded) The EX_Port has been disabled because the Integrated Routing license limit for the number of EX_Ports allowed in a switch has exceeded. Disabled (License not Installed for Integrated Routing) The EX_port has been disabled because License for Integrated Routing not installed in the switch. Disabled (Incompatible AMP Version) This port has been disabled because of Analytics Monitoring Platform (AMP) version conflict. Bypassed The port is bypassed (loop only). Loopback The port is in loopback mode. D_Port Diagnostic port; D_Port feature can be configured on both E_Port and F_Port. D_Port on E_Port displays the world wide node name (WWNN) of the remote switch and D_Port on F_Port displays the world wide port name (WWPN) of remote port. Brocade Fabric OS Command Reference 53-1004112-02 1083