Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 116

cfgDisable cfgDisable Disables a zone configuration. Synopsis cfgdisable Description Use this command to disable the current zone configuration. The fabric returns to non-zoning mode, a mode in which all devices can see each other. This command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message displays on the other switches to indicate that the transaction was aborted. If the default zone access mode is "No Access", then this command becomes equivalent to cfgEnable "d_efault_Cfg". Refer to defZone help for information on zone access configuration. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands None Examples SEE ALSO To disable the current zone configuration: switch:admin> cfgdisable You are about to disable zoning configuration. This action will disable any previous zoning configuration. Do you want to disable zoning configuration? \ (yes, y, no, n): [no] y cfgClear, cfgEnable, cfgSave 92 Brocade Fabric OS Command Reference 53-1004112-02