Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1193

zoneObjectRename zoneObjectRename Renames a zone object. Synopsis zoneObjectRename "objectName", "newName" Description Use this command to rename a zone object. You can use this command for all zone object types, including cfg, zone, and alias. Target Driven Peer Zones are not allowed to be edited using this command. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration must be enabled with the cfgEnable command. This command is not applicable for special zones, such as TI zones or RD zones. Notes When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands The following operands are required: "objectName" The name of the object you want to rename. "newName" The new name of the object. A zone configuration name must begin with a letter that can be followed by any number of letters, numbers, and underscores. Names are case-sensitive. For example, "Cfg_1" and "cfg_1" are different zone configurations. Quotation marks are optional. Spaces are ignored. Refer to the zoneCreate command for more information on name and member specifications. Examples SEE ALSO To create a configuration containing three zones: switch:admin> cfgshow "*" cfg: USA_cfg Red_zone; White_zone; Blue_zone switch:admin> zoneobjectrename "USA_cfg", "UK_cfg" switch:admin> cfgshow "*" cfg: UK_cfg Red_zone; White_zone; Blue_zone cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow, zoneObjectCopy Brocade Fabric OS Command Reference 1169 53-1004112-02