Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 356

fipsCfg 332 Telnet port number for the policy \ is in permit state. HTTP port number for the policy \ is in permit state. RPC port number for the policy \ is in permit state. Telnet port number for the policy \ is in permit state. HTTP port number for the policy \ is in permit state. RPC port number for the policy \ is in permit state. SNMP is not in read only mode. Bootprom access is enabled. FIPS mode cannot be configured at this time To back out of a zeroizing operation: switch:admin> fipscfg --zeroize You are Zeroizing FIPS configuration. Do you want to continue? (yes, y, no, n) [no]: no Operation cancelled. switch:admin> fipscfg --zeroize You are Zeroizing FIPS configuration. Do you want to continue? (yes, y, no, n) [no]: yes Executing 'secauthsecret --remove --all': This command deletes database of DH-CHAP secret keys.\ If a fabric requires authentication, deleting this \ database may cause switch to segment from the fabric. Do want to remove secret key database? \ (yes, y, no, n): [no] Operation cancelled... Executing 'pkiremove': WARNING!!! Removing pki objects will impair the security functionality of this fibre channel switch. If you want secure mode enabled, you will need to get the switch certificate again. About to remove Pki objects. ARE YOU SURE (yes, y, no, n): [no] Operation cancelled. Executing 'passwddefault': Password policies are already set to default. Executing 'seccertutil delkey': Deleting the key pair will automatically do the following: 1. Delete all existing CSRs. 2. Delete all existing certificates. 3. Reset the certificate filename to none. 4. Disable secure protocols. Continue (yes, y, no, n): [no] Brocade Fabric OS Command Reference 53-1004112-02