Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 781

portCmd --all-ls start -t stop delete --help Displays statistics for all configured WAN test sessions from all logical switches. Starts the WAN test session associated with the test ID. This command supports following option: Specifies the test time in seconds. Use this option if the test time is not configured with create or modify options. Stops the WAN test session associated with the test ID. Use all to stop all WAN test sessions. Deletes the WAN test session associated with the test ID. Use all to delete all WAN test sessions. Displays command usage. Examples To verify if packets can be sent to the destination IP address with maximum wait_time specified: switch:admin> portcmd --ping 12/ge0 \ -s 2007:7:30:32:227:138:10:120 \ -d 2007:7:30:32:227:77:0:60 -w 29000 Pinging 2007:7:30:32:227:77:0:60 from ip interface \ 2007:7:30:32:227:138:10:120 on 12/ge0 with 64 bytes of data Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255 Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=1ms ttl=255 Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255 Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255 Ping Statistics for 2007:7:30:32:227:77:0:60: Packets: Sent = 4, Received = 4, Loss = 0 ( 0 percent loss) Min RTT = 0ms, Max RTT = 1ms Average = 0ms To trace the IP router hops used to reach the remote (with packet size specified): switch:admin> portcmd --traceroute 12/ge0 \ -s 2007:7:30:32:227:138:10:120 \ -d 2007:7:30:32:227:77:0:60 -z 1452 Traceroute to 2007:7:30:32:227:77:0:60 from IP interface 2007:7:30:32:227:138:10:120 on 12/0, 30 hops max 1 1 ms 0 ms 0 ms Traceroute complete. To verify if packets can be sent to the destination IP address using VLAN tagging with the -c option. switch:admin> portcmd --ping 8/ge0 \ -s 192.168.10.1 -d 192.168.20.1 -v 10 -c 3 Brocade Fabric OS Command Reference 757 53-1004112-02