Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 894
A=Auto compression f=fastwrite t=Tapepipelining F=FICON, T=TPerf i=IPSec l=IPSec Legacy
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 894 highlights
portShow a=aggressive compression A=Auto compression f=fastwrite t=Tapepipelining F=FICON T=TPerf i=IPSec l=IPSec Legacy Flags: circuit: s=sack v=VLAN Tagged x=crossport 4=IPv4 6=IPv6 L=Listener I=Initiator To display a tunnel on a Brocade FX8-24 with IPSec enabled in legacy mode: switch:admin> portshow fciptunnel 1/12 Tunnel ID: 1/12 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: Off Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Enabled (legacy) QoS Percentages: High 50%, Med 30%, Low 20% Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:52:fe:00 Peer WWN: 10:00:00:05:1e:39:a4:76 Circuit Count: 1 Flags: 0x00000000 FICON: Off To display a summary view of the FCIP tunnel and circuits showing then legacy flag for the tunnel: switch:admin> portshow fciptunnel 8/12 -s Tunnel Circuit OpStatus Flags Uptime TxMBps RxMBps ConnCnt CommRt Met/G 8/12 - InProg cft--l- 3m3s 0.00 0.00 1 - - 8/12 0 8/xge1 InProg ---4v-s 3m3s 0.00 0.00 1 5000/5000 0/- 8/12 1 8/xge0 InProg ---4-xs 3m0s 0.00 0.00 1 1000/1000 0/- 8/12 2 8/xge1 InProg ---6--s 3m0s 0.00 0.00 1 2000/2000 0/- Flags: tunnel: c=compression m=moderate compression a=aggressive compression A=Auto compression f=fastwrite t=Tapepipelining F=FICON T=TPerf i=IPSec l=IPSec Legacy Flags: circuit: s=sack v=VLAN Tagged x=crossport 4=IPv4 6=IPv6 To display a summary view of an FCIP tunnel and its circuits on the Brocade FX8-24 with the --perf option : switch:admin> portshow fciptunnel 7/12 --summary --perf Tunnel Circuit TxMBps RxMBps ComRatio RTT(ms) ReTx OutOfSeq SlowStart 1/22 - 0.00 0.00 1.00:1 - 0 0 0 1/22 0 1/xge0 0.00 0.00 - 0 0 0 0 1/22 1 1/xge1 0.00 0.00 - 0 0 0 0 870 Brocade Fabric OS Command Reference 53-1004112-02