Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 419

haReboot haReboot Performs high availability (HA) reboot. Synopsis hareboot Description Use this command to perform warm reboot in the switch-based systems. On chassis-based systems, this command behaves similar to the haFailover command so that the standby CP becomes the active CP. In chassis-based systems, if the active and standby CPs are not synchronized or the system is not in the redundant mode, the command aborts. When the switch-based system is not fully up or stable, the haReboot command cannot be completed. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To perform Ha reboot in the switch-based systems: switch:admin> hareboot HA Rebooting ... To perform Ha reboot in the chassis-based systems: switch:admin> hareboot Restarting system with command 'Machine Rebooting SEE ALSO haDisable, haEnable, haShow Brocade Fabric OS Command Reference 395 53-1004112-02