Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 289
fcrBcastConfig
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
fcrBcastConfig fcrBcastConfig Displays or sets the broadcast frame forwarding option. Synopsis fcrbcastconfig --show fcrbcastconfig --enable -f fabric_id fcrbcastconfig --disable -f fabric_id fcrbcastconfig --help Description Use this command to enable or disable the broadcast frame option or to display the current configuration. If no operands are specified, this command displays the usage. By default, frame forward option is disabled. Use the --show option to display the current settings on the switch. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: --show Shows the current broadcast configuration as enabled or disabled. If broadcast frame forwarding is disabled for selected FIDs, only the enabled FIDs in the current configuration are displayed. --enable Enables the frame forwarding option for a specified fabric ID. --disable Disables the frame forwarding option for a specified fabric ID -f fabric_id Specifies the fabric ID to be disabled or enabled. Valid values are 1 to 128. This operand is required with the --enable and --disable options. --help Displays the command usage. Examples To display the current configuration: fcr:admin> fcrbcastconfig --show Broadcast configuration is disabled for all FID To enable broadcast frame forwarding for FID 33, 28, and 2: fcr:admin> fcrbcastconfig --enable -f 33 fcr:admin> fcrbcastconfig --enable -f 28 fcr:admin> fcrbcastconfig --enable -f 2 Brocade Fabric OS Command Reference 265 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/289.png)