Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 938

portTestShow Timeout ErrorCode Number of timed out tests. Error code, if any. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operand: -ports itemlist Displays test results for the specified ports. This operand is optional; if omitted, data for all ports are displayed. Refer to the itemList help page for further details. -index | -i indexlist Displays test results for a single port or for a range of ports identified by port index numbers. You may specify index ranges separated by "-", for example, -i 33-47. This operand is optional, if omitted data for all ports are displayed. -x [indexhexlist]] Displays test results for a port or a range of ports identified by port index numbers in hexadecimal format. You may specify port ranges separated by "-", for example, -x 0x21-0x26. This operand is optional, if omitted data for all ports are displayed. Examples To display information from portTest: switch:admin> porttestshow 1 Port 1 : PASS PortType: OTHER PortInternalState: INIT Pattern: 0x0 Seed: 0x0 PortState: NO TEST PortTypeToTest: NO_TEST UserDelay: 0 TotalIteration: 0 TotalFail: 0 StartTime: NONE StopTime: NONE Timeout: 0 CurrentIteration: 0 ConsecutiveFail: 0 ErrorCode: 0 To display information from portTest on a port specified by the index number: switch:admin> porttestshow -index 32 Port 32 : PASS PortType: E PORT PortState: TEST DONE PortInternalState: INIT PortTypeToTest: NO_TEST Pattern: 0xb Seed: 0xaa UserDelay: 10 TotalIteration: 20 CurrentIteration: 20 TotalFail: 0 ConsecutiveFail: 0 StartTime: Wed Aug 13 06:39:59 2014 StopTime: Wed Aug 13 06:40:19 2014 Timeout: 0 ErrorCode: 0 914 Brocade Fabric OS Command Reference 53-1004112-02