Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1088

supportShowCfgEnable supportShowCfgEnable Enables a group of commands to be displayed under the supportShow command. Synopsis supportshowcfgenable os | exception | port | fabric | services | security | network | portlog | system | extend | filter | ficon | iswitch | asic_db | ag | dce_hsl |crypto | fcip Description Use this command to enable a group of commands to be displayed under the supportShow command. Use the supportShowCfgDisable command to disable groups of commands. The FCIP commands are supported only on the Brocade FX8-24 platform and cannot be configured to collect data on unsupported platforms. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: os Enables the OS group commands. exception Enables the exception group commands. port Enables the port group commands. fabric Enables the fabric group commands. services Enables the service group commands. security Enables the security group commands. network Enables the network group commands. portlog Enables the portlog group commands. system Enables the system group commands. extend Enables the extend group commands. filter Enables the filter group commands. ficon Enables the FICON group commands. 1064 Brocade Fabric OS Command Reference 53-1004112-02