Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 202

diagShow diagShow Displays diagnostics status. Synopsis diagshow [--slot number] [-post] [-port number] [-use_bports value] Description Use this command to display the diagnostics status for the specified list of ports. Notes You cannot interrupt the test by pressing the return key (). The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following optional operands: --slot number Specify which slot to operate on. If this option is not specified, the default slot 0 is used. The default slot is designed to operate on fixed-port-count products. By default, this command displays information for all user ports in the system. Default slot 0 is not valid in a chassis system. -post Displays the status of the last run power-on self-test (POST) on the specified slot. This operand is supported only on 32 Gbps-capable platforms. -port number Displays status of the specified user slot. This is the default behavior if the -post option is not specified. -use_bports value If this value is nonzero, this command displays the diagnostics status for the blade ports specified in -use_bports; otherwise, the command displays information for the user ports specified in -uports. The default value is 0. Examples SEE ALSO To display diagnostic status on a switch blade: switch:admin> diagshow Slot# Switch Type ID Status Rev# Blade 0 Fixed Configuration Switch 171 ENABLED 2.0 FX8-24 (output truncated) itemList Post Status POST PASSED 178 Brocade Fabric OS Command Reference 53-1004112-02