Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1027

sfpShow Operands The identifier field has the following values to indicate the various transceiver types: • 1 for GBIC • 2 for On-board • 3 for SFP • 6 for XFP • 12 for QSFP • 13 for QSFP+ • 17 for QSFP28 This command has the following operands: slot For bladed systems only, specifies the slot number of the port to display, followed by a slash (/) port -link [-force] -f -pid pid -all -health Green Yellow No License Specifies the number of the port for which to display the SFP information, relative to its slot for bladed systems. Use switchShow for a list of valid ports. This operand is optional; if omitted, this command displays a summary of all SFPs on the switch. Displays the diagnostic information from cached data for a local switch port and the peer port. The -force option displays the real-time diagnostic information from the registers for a port. Refreshes the SFP information. This option is valid only when sfpShow is issued for a specific port. Specifies the diagnostics information of a remote switch port along with its peer port. Displays detailed data for all available SFPs on the switch. This operand is not compatible with slot/port operands. Displays SFP health status information from MAPS for 10 Gbps and 16 Gbps SFPs and for 16 Gbps QSFPs (Quad SFPs). When any of the diagnostic SFP parameters such as current, voltage, receiver power, transmit power, and temperature crosses user-configured low and high thresholds, the SFP health state changes. Possible health states include the following: SPF operates within MAPS thresholds. At least one SFP parameter monitored by MAPS has crossed a low or high threshold. The switch does not have a Fabric Vision license. Brocade Fabric OS Command Reference 53-1004112-02 1003