Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 226

errShow errShow Displays the error log messages with pagination. Synopsis errshow [-a | -r | -t | -o] Description Use this command to display external error log messages one at a time. When executed without operands, this command prints the error messages for the logical switch context in which the command is executed. When used with the -a option, the command prints the error messages for the entire chassis. The messages are displayed with page breaks. The -r operand displays the messages in reversed order. The output of this command is unique for each Control Processor (CP). On dual CPs this command must be executed on each CP to obtain a complete record. Specify both -t and -o operands to display messages within a time period. Specify the -t operand alone to display messages from a specific time to the end of the log. Specify the -o operand alone to display messages from the beginning of the log to the specified time. The following information displays in each message: Start delimiter Delimiter string for the start of a message. Timestamp Timestamp for the message. Message ID Message identifier. External sequence number Sequence number for the message Security audit flag Security audit message displayed as AUDIT. Severity Severity of the message. Valid values include INFO, WARNING, ERROR, and CRITICAL. Switch name Switch name for the generator of this message, or "chassis". Message Message body. End delimiter Delimiter string for the end of a message. 202 Brocade Fabric OS Command Reference 53-1004112-02