Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 935

portTest Notes The test is skipped if the F_Ports are connected to non-Brocade-branded devices. The test is also skipped on F_Ports if Virtual Fabric is enabled on any platform. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: -ports itemlist Specifies the list of user ports to test. By default, all user ports in the switch are tested. Refer to the itemList help page for more information. -iteration count Specifies the number of times (or number of frames per port) to execute this test. Specify 0 to run the test in timeout mode, or specify -1 to run the test indefinitely. The default value is 20. -userdelay time Specifies the delay between frames sent by portTest, in milliseconds. The default value is 10 milliseconds. -timeout time Specifies the number of seconds to run the test. The timeout option goes into effect only if iteration is set to zero. The default value of timeout is 0. -pattern pattern Specifies the pattern of the test packet payload. The pattern is selected from the set of the first twenty predefined pattern types. Use the dataTypeShow command to view the patterns supported with portTest. For each pattern, the datTypeShow command displays the name, the pattern type number, and an example. Specify the pattern by its type number. If pattern is not specified, it defaults to RANDOM (type=11). -patsize size Specifies the size of the pattern. The default pattern size is 1024 bytes. The range is 4 to 2048 bytes. -seed seed Specifies the seed value to be used with the pattern. The default seed value is 0xaa. -listtype porttype Specifies the type of ports on which to run portTest. Valid values for porttype include the following: -1 All ports (default). -2 All L_Ports. -3 All F_Ports. -4 All E_Ports. Brocade Fabric OS Command Reference 911 53-1004112-02