Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 441

interfaceShow DECOM_SEND (8) Preparing to update routes of the local port; negotiates for the necessary before updating the routes. DECOM_TIMER (9) The request for one or more locks failed; delay for a short interval before retrying. DECOM_DONE (10) The local routes are updated; waiting for acknowledgement from the neighbor. DECOM_BLOCK (11) The local routes are updated; the neighbor sent acknowledgement. chassis_lock Internal variable lock_request Internal variable nbr_lock_lock Internal variable r_rdy_rcvd Indicates if the neighbor has reported as ready to receive frames. nbr r_rdy flags Internal flags reported by the neighbor. lock_busy_cnt Number of times a lock has reported as busy. decom_active Indicates if a decommissioning request is active on the port. decom_initiator Indicates if the local port is the decommissioning request initiator. decom_active_port Indicates the port for which the decommissioning request is active. decom_trunk_member Indicates if decommissioning request is for a multi-link trunk. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the port to be displayed, followed by a slash (/). port Specify the number of the port to be displayed, relative to its slot for bladed systems. Use switchShow for a list of valid ports. This operand is optional; if omitted, the interface information for all ports is displayed. Brocade Fabric OS Command Reference 417 53-1004112-02