Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 856

portShow Overrun Buffer overrun interrupts. Suspended Transmission suspended interrupts. Parity_err Central memory parity errors. 2_parity_err Secondary transmission parity errors. CMI_bus_err Control message interface errors. FEC Corrected Blocks FEC corrected block errors. FEC Uncorrected Blocks FEC uncorrected block errors. The second column displays link error status block counters. The third column shows the number of F_RJTs and F_BSYs generated. For L_Ports, the third column also displays the number of loop initialization protocols (LIPs) received, number of LIPs transmitted, and the last LIP received. Operands This command has the following port operands: slot For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). port Specifies the number of the port to be displayed, relative to its slot for bladed systems. Use switchShow for a listing of valid port numbers. -link [-force] Displays the diagnostic information from cached data for a local switch port and the peer port. The -force option displays the real-time diagnostic information from the registers for a port. -i index1[-index2] Specifies a port or a range of ports identified by port index numbers. You can specify multiple index ranges separated by a space, for example, 33-38 40-60. Port indexes are supported only if PortSwap is disabled. They are not supported on GbE ports and configured F_Port trunks. Use the -i option without a port index argument to display the portSwap status, or alternately use portSwapShow. -x [hex1 [-hex2]] Specifies a port or a range of ports identified by port numbers, index number in hexadecimal format. You may specify multiple port ranges separated by a space, for example, -x 21-26 28-3c. -pid pid Specifies the diagnostics information of a remote switch port along with its peer port. 832 Brocade Fabric OS Command Reference 53-1004112-02