Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 878

portShow command Specifies the type of information to be displayed. This operand is optional; if omitted, the default (-stats) is used. You can specify more than one command option. Valid commands include the following: -stats Displays FCP emulation statistics. This is the default display. -info Displays general FCP emulation information. -cfg Displays the FCP emulation configuration. -dump Displays a raw data dump including data for all information types. param Limits output to one or more of the following parameters, given the commands and levels specified with this command. This operand is optional; if omitted, output for all parameters is displayed. There is no default parameter. -sid SID Displays output for the specified SID only. -did DID Displays output for the specified DID only. -lun LUN Displays output for the specified LUN only. -timer Displays timer information only. options Affects all levels and commands globally. Only one option is supported. -zero Displays zero-valued statistics. Note that some commands may show zero-valued information regardless of whether or not this option is specified. -ficon Displays sub-menu for FICON emulation display commands when issued with a VE_Port number. The syntax for -ficon is as follows: portshow xtun [slot/]ve_port -ficon [command] [options] The following optional commands are supported with -ficon; if omitted, the usage for all parameters is displayed. The xtun -ficon command options include displays for all types of FICON Emulation. -help Displays the command usage. You must specify a VE_Port number to display the help functions, for example, portshow xtun 7/12 -ficon -help. 854 Brocade Fabric OS Command Reference 53-1004112-02