Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 656
To delete a VLAN tag entry, To delete a VLAN tag entry for a crossport
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 656 highlights
portCfg To display the VLAN tag configuration (for an explanation of the flags, refer to portShow): switch:admin> portshow vlantag ge2 Port: ge2 Interface Address VlanId L2CoS Flags Destination Address 192.168.2.10 200 5 Perm Net 0.0.0.0 192.168.0.20 100 0 Perm 192.168.0.10 192.168.0.21 200 0 Perm 192.168.0.11 2000::20 300 0 Perm 2000::10 2000::21 400 0 Perm 2000::11 To create a VLAN tag entry for a failover crossport interface with a VLAN ID of 200 and an L2 CoS value of 1 and to display the configuration: switch:admin> portcfg vlantag 8/xge0 add 192.168.11.20 200 1 -x Operation Succeeded switch:admin> portshow vlantag 8/xge0 Port: 8/xge0 Interface Address VlanId L2CoS Flags Destination Address 192.168.11.20 200 1 Perm Net (crossport) 0.0.0.0 To delete a VLAN tag entry: switch:admin> portcfg vlantag ge2 delete 192.168.2.10 200 Operation Succeeded To delete a VLAN tag entry for a crossport: switch:admin> portcfg vlantag 8/xge0 delete 192.168.11.20 200 -x Operation Succeeded To create an IPsec policy for the Brocade 7840 switch: switch:admin> portcfg ipsec-policy myPolicy1 create -k "some test key" Operation Succeeded To view the IPsec policy status for the Brocade 7840 switch and the Brocade SX6 extension blade: switch:admin> portshow ipsec-policy all --ike IPsec Policy OpStatus IKECnt Pre-Shared Key IKE-ID OpStatus RefCnt Local IP Address Remote IP Address myPolicy1 NotInUse 0 some test key 632 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/656.png)