Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1021
Disables further tuning optimization and resets all tuning values back to their default values.
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1021 highlights
serDesTuneMode Operands This command has the following operands: --set Enables SerDes tuning mode and sets new SerDes values on FC8-16 blades in slots 1, 2 and 7 and on peer ports in the CR4S-8 core blade. --reset Disables SerDes tuning mode and resets SerDes values to default on FC8-16 blades in slots 1, 2 and 7 and on peer ports in the CR4S-8 core blade. --show Indicates whether the SerDes tuning mode is enabled or disabled. --autoenable Enables SerDes tuning optimization on all backend ports. --autodisable Disables further tuning optimization but retains all current tuning values identified by the algorithm. --autoreset Disables further tuning optimization and resets all tuning values back to their default values. If SerDes tune mode or was set, the configuration is restored. --autoshow Displays whether SerDes tuning optimization is enabled or disabled. --help Displays the command usage. Examples To enable SerDes tuning mode on a DCX-4S chassis with two FC8-16 blades and to display the configuration: switch:admin> serdestunemode --set serdestunemode is turned on New serdes values set on slot = 1 New serdes values set on slot = 2 New serdes values set on slot = 7 switch:admin> serdestunemode --show serdestunemode is enabled To disable SerDes tuning mode and reset the SerDes values to defaults and to display the configuration: switch:admin> serdestunemode --reset serdestunemode is turned off New serdes values reset on slot = 1 New serdes values reset on slot = 2 New serdes values reset on slot = 7 switch:admin> serdestunemode --show serdestunemode is disabled Brocade Fabric OS Command Reference 997 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/1021.png)