Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 686

portCfgDPort -show --help Lists all the ports in the provision list. If the port range is specified, the status of each port on the provision list displays. Displays ON if the port is in the provision list or OFF if the port is not in the provision list. Displays the command usage. Examples To configure a single port as a D_Port: switch:admin> portdisable 42 switch:admin> portcfgdport --enable 42 Caution: D_Port functionality is only available on 16Gb-capable platforms \ with 16Gb FC SFPs, 10Gb FC SFPs, or 8Gb LWL/ELWL FC SFPs, QSFPs or QSFP+. switch:admin> portenable 42 To clear the D_Port configuration: switch:admin> portdisable 42 switch:admin> portcfgdport --disable 42 switch:admin> portenable 42 To add a port to the D_Port provision list: switch:admin> portcfgdport --provision -add 7/16 Caution: D_Port functionality is only available on 16Gb-capable platforms \ with 16Gb FC SFPs, 10Gb FC SFPs, 8Gb LWL/ELWL FC SFPs, QSFPs or QSFP+. To add a port to the D_Port provision list and enable DWDM mode on the port: switch:admin> portcfgdport --provision -add -dwdm 7/16 Caution: D_Port functionality is only available on 16Gb-capable platforms \ with 16Gb FC SFPs, 10Gb FC SFPs or 8Gb LWL/ELWL FC SFPs. To remove a port from the provision list: switch:admin> portcfgdport --provision -delete 4/12 SEE ALSO To list all the ports in the provision list: switch:admin> portcfgdport --provision -show Slot Port D-Port provision DWDM 7 16 ON ON 7 17 ON OFF 7 18 ON ON fabricLog, portCfg, portDPortTest, portShow, switchShow 662 Brocade Fabric OS Command Reference 53-1004112-02