Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 603

nsZoneMember Notes Additional lines may display if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4 supported • IP address (node) • IPA • port and node symbolic name (local device only) • fabric port name • hard address or port IP address The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: PID | WWN Specifies the port ID or WWN of the device for which to display zoned devices. -a Displays each local device's online zoned device data, including the device PID and zone alias. -n Displays each local device's online zoned device data including the device PID. -u Displays all unzoned devices in the entire fabric. The device data includes the device PID and zone alias. -domain domain Displays zoned device data for a device (either local or remote) with the specified domain. -index index Displays zoned device data for a device (either local or remote) with the specified port index. --help Displays the command usage. Examples To display information about all the online devices zoned with the given device: switch:admin> nszonemember 0x0416e2 3 local zoned members: Type Pid COS PortName NodeName SCR NL 041901;2,3;10:00:00:00:c9:26:0e:ae;20:00:00:00:c9:26:0e:ae; 3 Fabric Port Name: 20:09:00:60:69:50:06:78 Permanent Port Name: 10:00:00:00:c9:26:0e:ae Device type: Physical Initiator NL 0416e2;3;22:00:00:20:37:d9:6b:b3;20:00:00:20:37:d9:6b:b3; 0 FC4s: FCP [SEAGATE ST318304FC 0005] Fabric Port Name: 20:06:00:60:69:50:06:78 Permanent Port Name: 22:00:00:20:37:d9:6b:b3 Device type: Physical Target NL 0416e4; 3;22:00:00:20:37:d9:61:ac;20:00:00:20:37:d9:61:ac; 0 Brocade Fabric OS Command Reference 579 53-1004112-02