Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1170
from the following WWN Recovery Options Menu., WWN Seeprom Chassis Serial Number Mismatch.
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1170 highlights
wwnRecover To perform WWN recovery (the following example shows the WWN errors and the recovery process): switch:admin> wwnrecover WWN Discrepancies (Error:64) detected. Please attempt recovery of these errors (where possible) by navigating to the required recovery selection from the following WWN Recovery Options Menu. Please note that in the event of a mismatch in the LicenseIds, between WWN1 and WWN2 cards, wwn recovery may not be possible. In this case a factory programmed card with a matching LicenseId must be used, as a replacement card, to complete the wwn recovery. WWN 1 and WWN 2 Non-Critical Seeprom data is mismatched. WWN Non-Critical Seeprom Problem Details WWN Seeprom Chassis Serial Number Mismatch. WWN 1 Serial Number: BADSerial WWN 2 Serial Number: GOODSerial WWN Recovery Options 0. Exit 3. Recover WWN 2 from WWN 1 4. Recover WWN 1 from WWN 2 Enter Selection > 4 You have opted to recover WWN1 from WWN 2. Are you sure? Please Confirm: (yes, y, no, n): [no] y Recovering Serial Number... Serial Number Recovery completed. WWN Seeprom Chassis Part Number Mismatch. WWN 1 part Number: GoodPARTNO WWN 2 Part Number: BadPARTNo WWN Recovery Options 0. Exit 3. Recover WWN 2 from WWN 1 4. Recover WWN 1 from WWN 2 Enter Selection > 3 You have opted to recover WWN2 from WWN1. Are you sure? Please Confirm: (yes, y, no, n): [no] y Recovering Part Number... Part Number Recovery completed. SEE ALSO licenseIdShow, wwn 1146 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/1170.png)