Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1019

sensorShow sensorShow Displays sensor readings. Synopsis sensorshow Description Use this command to display the current temperature, fan, and power supply status and readings from sensors located on the switch. The actual location of the sensors varies, depending on the switch type. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To view all sensor values: switch:admin> sensorshow sensor 1: (Temperature) is Ok, value is 39 C sensor 2: (Temperature) is Absent sensor 3: (Temperature) is Absent sensor 4: (Temperature) is Absent sensor 5: (Temperature) is Ok, value is 26 C sensor 6: (Temperature) is Ok, value is 27 C sensor 7: (Fan ) is Ok, speed is 2537 RPM sensor 8: (Fan ) is Ok, speed is 2537 RPM sensor 9: (Fan ) is Ok, speed is 2556 RPM sensor 10: (Power Supply ) is Ok sensor 11: (Power Supply ) is Absent sensor 12: (Power Supply ) is Ok sensor 13: (Power Supply ) is Absent SEE ALSO fanShow, tempShow Brocade Fabric OS Command Reference 995 53-1004112-02