Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 139
chassisEnable, ports
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
chassisEnable chassisEnable Enables all user ports in a chassis. Synopsis chassisenable Description Use this command to enable a Virtual Fabric-aware chassis. All Fibre Channel ports that passed the power-on self test (POST) are enabled. They may come online if connected to a device, or remain offline if disconnected. Use chassisEnable to re-enable the chassis after making configuration changes or running offline diagnostics. If the chassis is partitioned into multiple logical switches and physically connected to multiple logical fabrics, the logical switches rejoin their fabrics. As each port is enabled, the front panel LED changes from slow-flashing amber to nonflashing green for online ports, or to nonflashing amber for ports that do not initialize. Disconnected ports remain unlit. Loopback ports slowly flash green when online. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples SEE ALSO To enable a chassis: switch:admin> chassisenable bladeDisable, bladeEnable, chassisDisable, switchShow, switchDisable, switchEnable, switchCfgPersistentEnable, switchCfgPersistentDisable Brocade Fabric OS Command Reference 115 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/139.png)