Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1179

2. Traffic isolation zone commands To create an activated traffic isolation zone with failover enabled (default). switch:admin> zone --create -t ti purplezone \ -p "1,1; 2,4; 1,8; 2,6" To create a deactivated traffic isolation zone with failover disabled:. switch:admin> zone --create -t ti -o dn purplezone \ -p "1,1; 2,4; 1,8; 2,6" To add an E_Port and N_Port member as a portlist to an existing TI zone: switch:admin> zone --add purplezone \ -p "3,4; 3,6" To add the option to disable failover for a TI zone: switch:admin> zone --add -o n purplezone To add the option to enable failover for a TI zone: switch:admin> zone --add -o f greenzone" -p "3,4" To remove portlist members from an existing TI zone. switch:admin> zone --remove bluezone -p "3,4; 3,6" To activate the TI zone "bluezone": switch:admin> zone --activate bluezone To deactivate the TI zone "purplezone": switch:admin> zone --deactivate purplezone To delete the TI zone "bluezone": switch:admin> zone --delete bluezone To display all TI zones in the defined configuration: switch:admin> zone --show Defined TI zone configuration: TI Zone Name: ti_blue Port List: 4,55; 10:00:00:00:00:01:00:01; \ 10:00:00:00:00:01:00:04; 3,9 Configured Status: Activated / Failover-Disabled Enabled Status: Deactivated TI Zone Name: ti_red Port List: 4,4; 5,5; 3,3 Configured Status: Activated / Failover-Enabled Enabled Status: Activated / Failover-Enabled Brocade Fabric OS Command Reference 53-1004112-02 zone 1155