Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1109

switchShow (downstream) The E_Port is a downstream path away from the principal switch of the fabric. FICON Persistent DID This port has been disabled, because the switch could not obtain its configuration domain ID during the fabric reconfiguration when fmsmode was enabled. See the ficonCupSet help page for more information. Fabric ID conflict Two different fabrics have been assigned the same fabric ID. Applicable only to EX_Ports and Logical Fabric environments. Fabric ID oversubscribed One fabric has been assigned two different fabric IDs (EX_Ports only). AoQ Application-oriented QoS; indicates that an F_Port or N_Port has negotiated a link that is capable of quality of service (QoS). Both sides of the link have QoS capability and agreed on the protocol. The link could be between an HBA and an Access Gateway, between an Access Gateway and an edge switch, or between an HBA and an edge switch. LB mode If the Access Gateway cannot negotiate QoS capabilities with the edge switch, an HBA connected to the Access Gateway will not be able to negotiate a QoS link with the Access Gateway. (logical) Indicates a logical port. The switchShow output shows all logical ports currently present in the logical switch. The command displays -1 for the slot for logical ports and the user port number for slot port. The logical port numbers are not persistent and may change when the logical interswitch links (LISLs) are deleted and recreated. A logical port is shown to be in one of the following states: E_Port (if the port is online), offline, or disabled. When the port is disabled, a reason is provided. segmented Indicates a segmented or disabled port along with one of the following segmentation reasons: (Encrypt incompatible) Port segmentation or port disable due to mismatched configurations. (Compress incompatible) Port segmentation or port disable due to mismatched configurations. (Encrypt limitation) Port segmentation or port disable due to reaching encryption limitations. (Compress limitation) Port segmentation or port disable due to reaching compression limitations. (Authentication failure) Port segmentation or port disable due to authentication failure. (Defzone conflict) Port segmentation due to defzone states. Brocade Fabric OS Command Reference 53-1004112-02 1085