Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 462
Protocol Dest Port, Dest Port Action
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 462 highlights
ipFilter 438 6 any 7 any 8 any udp 123 permit tcp 600 - 1023 permit udp 600 - 1023 permit Name: default_ipv6, Type: ipv6, State: defined Rule Source IP Protocol Dest Port Action 1 any tcp 22 permit 2 any tcp 23 permit 3 any tcp 80 permit 4 any tcp 443 permit 5 any udp 161 permit 6 any udp 123 permit 7 any tcp 600 - 1023 permit 8 any udp 600 - 1023 permit Name: ex1, Type: ipv6, State: active Rule Source IP Protocol Dest Port Action 1 fec0:60:69bc:60:260:69ff:fe80:d4a tcp 23 permit To create an IPv4-type IP filter policy: switch:admin> ipfilter --create ex2 -type ipv4 To add a rule to the created policy "ex2": switch:admin> ipfilter --addrule ex2 -sip 10.32.69.99 \ -dp 23 -proto tcp -act permit To display the IP filter policies, including the new policy: switch:admin> ipfilter --show Name: default_ipv4, Type: ipv4, State: active Name: default_ipv4, Type: ipv4, State: active Rule Source IP Protocol Dest Port Action 1 any tcp 22 permit 2 any tcp 23 permit 3 any tcp 80 permit 4 any tcp 443 permit 5 any udp 161 permit 6 any udp 123 permit 7 any tcp 600 - 1023 permit 8 any udp 600 - 1023 permit Name: ex2, Type: ipv4, State: defined (modified) Rule Source IP Protocol Dest Port Action 1 10.32.69.99 tcp 23 permit To save the IP Filter policy "ex2" (the status of the policy changes from modified to defined after the policy is saved): switch:admin> ipfilter --save ex2 switch:admin> ipfilter --show Name: default_ipv4, Type: ipv4, State: active Name: default_ipv4, Type: ipv4, State: active Rule Source IP Protocol Dest Port 1 any tcp 22 2 any tcp 23 Action permit permit Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/462.png)