Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 341

ficonCupShow HCP MIHPTO DD_LOG diag_info hlthchk_log LP Host control prohibited Displays the FICON-CUP missing interrupt handler primary timeout (MIHPTO) value in seconds. Displays the latest Director Diagnostics Log. Displays dignostic information for the logical switch such as whether Diagnostic Interval has been set for CUP Diagnostics (if so, then Statistics Sampling is running), along with additional information about Statistics Sampling by the CUP, the detected CUP Diagnostic capabilities and settings for other switches in the fabric.. Displays the HealthCheck Logs for the logical switch. It displays Sense Data returned to the FICON host for Asynchronous Error Reporting events generated by the CUP for Congestion, Latency, or Port Fencing events which have been detected by the switch. Displays the logical paths on the switch. For each entry, the command displays the port identifier (PID), the LPAR identifier (CHID), reporting state (operational or reset (=nonoperational)), and reporting path state (current, primary, or alternate). Examples To display the FMS mode for the switch: switch:user> ficoncupshow fmsmode fmsmode for the switch: Enabled To display the mode register for the switch: switch:user> ficoncupshow modereg POSC UAM ASM DCAM ACP HCP 1 0 1 1 1 0 To display the ASM bit in the mode register for the switch: switch:user> ficoncupshow modereg ASM ASM --1 To display the MIHPTO value for the CUP: switch:user> ficoncupshow MIHPTO MIHPTO for the CUP: 60 seconds Brocade Fabric OS Command Reference 317 53-1004112-02