Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 368

firmwareDownloadStatus firmwareDownloadStatus Displays the status of a firmware download. Synopsis firmwaredownloadstatus Description Use this command to display an event log that records the progress and status of events during a firmware download. The event log is created by the firmware download process and is kept until you issue another firmwareDownload command. A timestamp is associated with each event. When downloading Fabric OS firmware, the event logs in the two control processors (CPs) are synchronized and you can run this command from either CP. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To display the status of a firmware download on a switch: switch:admin> firmwaredownloadstatus [1]: Tue Mar 29 21:43:14 2011 Firmware is being downloaded to the switch. This step may take up to 30 minutes. [2]: Tue Mar 29 21:48:26 2011 Firmware has been downloaded to the secondary partition of the switch. [3]: Tue Mar 29 22:06:57 2011 The firmware commit operation has started. This may take up to 10 minutes. [4]: Tue Mar 29 22:10:19 2011 The commit operation has completed successfully. [5]: Tue Mar 29 22:10:19 2011 Firmwaredownload command has completed successfully. Use firmwareshow to verify the firmware versions. To display the status of a firmware download on a chassis: switch:admin> firmwaredownloadstatus [1]: Fri Mar 25 13:12:56 2011 Slot 7 (CP1, active): Firmware is being downloaded to the switch. This step may take up to 30 minutes. [2]: Fri Mar 25 13:33:23 2011 Slot 7 (CP1, active): Firmware has been downloaded to the secondary partition of the switch. [3]: Fri Mar 25 16:38:55 2011 Slot 7 (CP1, active): Firmwarerestore is entered. System will reboot and a firmware commit operation will start upon boot up. [4]: Fri Mar 25 16:49:12 2011 Slot 7 (CP1, standby): The firmware commit operation has started. This may take up to 344 Brocade Fabric OS Command Reference 53-1004112-02