Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 406

frameLog -type timeout | du | unroute Specifies the discard frame types to enable. Specify timeout for timeout discard frames, du for destination unreachable frames, and unroute for unroutable frames. --clear Clears the stored history of discarded frames. This operation is permitted only when the feature is enabled. --status Displays the current status of the frame log service, and the type of discard frames that are being logged. --show Prints a listing of details about stored frames that match the specified filter criteria. This operation is permitted only when the feature is enabled. You can specify one or more of the following options to filter the output. When used without operands, the --show command displays the unfiltered output. This option supports specifying that the TX port or RX port of displayed frames should be a backend port. -type timeout | du | unroute Specifies the discard frame types to display. Specify timeout for timeout discard frames, du for destination unreachable frames, and unroute for unroutable frames. -txport [slot/]port Displays only the frames that were bound to exit by the specified egress port. The -txport option accepts argument "-1" (for fixed-port switches) or "-1/-1" (for modular switches). These stand for "any backend port". Using this notation, you can select specifically those discarded frames that have a backend port in the TX port field. Individual backend ports cannot be specified, only the quality of being a backend port can be specified. -rxport [slot/]port Displays only the frames that entered the chassis on the specified port. The -rxport option accepts argument "-1" (for fixed-port switches) or "-1/-1" (for modular switches). These stand for "any backend port". Using this notation, you can select specifically those discarded frames that have a backend port in the RX port field. Individual backend ports cannot be specified, only the quality of being a backend port can be specified. -sid source_PID Displays only the frames with the specified 24-bit source address in the FC header. The port ID (PID) must be written in hexadecimal and must be prefixed by 0x. -did destination_PID Displays only the frames with the specified 24-bit destination address in the FC header. The port ID (PID) must be written in hexadecimal and must be prefixed by 0x. -sfid fabric_ID Displays only the frames with the specified fabric ID as the source fabric ID. -sdfid fabric_ID Displays only the frames with the specified fabric ID as the destination fabric ID. 382 Brocade Fabric OS Command Reference 53-1004112-02