Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 474

ipSecConfig --flush manual-sa Flushes all SA entries (including manually keyed and automatically keyed SAs) from the kernel SADB. All active TCP sessions that are using IPSec protection are terminated when this command is executed. This command, unlike delete, does not remove the policies from the configuration database. Flushing any other policy parameters is not supported. --show Displays current IPSec or IKE configuration. The syntax for the display option is as follows: --show type [subtype] arguments type Specifies the policy to be displayed. Valid values for type include the following: policy ips Displays the IPSec policy configuration. A policy subtype must be specified when displaying the IPSec policy configuration. Valid subtypes include the following: selector Displays IPSec selector parameters including IPSec policy name, IP address of the local entity, IP address of the remote entity, direction of traffic flow (inbound or outbound), upper layer protocol used, and IPSec transform index. transform Displays IPSec transform parameters including IPSec policy name, key management protocol (version) or manual SA, processing option for selected IP traffic, IPSec mode (tunnel or transport), IP address of the local entity, IP address of the remote entity, and SA proposal. sa-proposal Displays the parameters of the SA proposal, including proposal name, lifetime (in seconds and in byte units, or infinite), and associated SA definitions. sa Displays security association (SA) parameters for the specified IPSec policies including policy names, IPSec protocol used (AH or ESP), encryption and authentication algorithms. policy ike Displays the IKE policy configuration. No subtype is required with this command. The command displays the following IKE policy parameters: IKE version, IP address of the remote entity, IP address of the local entity, encryption algorithm, hash algorithm, PRF algorithm, DH group, authentication method, path and filename of the preshared key. manual-sa Displays the Security Associations in the local SADB. No subtype is required with this command. arguments Specifies the display selection as one of the following: -a Displays all configuration information for the specified type and subtype. 450 Brocade Fabric OS Command Reference 53-1004112-02