Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 298

fcrIclPathBWMonitor fcrIclPathBWMonitor Sets or displays FC Router ICL bandwidth monitor parameters for EX_Ports. Synopsis fcriclpathbwmonitor --enable fcriclpathbwmonitor --disable fcriclpathbwmonitor --show fcriclpathbwmonitor --help Description Use this command to enable or disable the Inter Chassis Link (ICL) EX_Ports bandwidth Monitor feature on an FC Router, or to display the current status of ICL bandwidth feature and the ICL slot bandwidth assigned to connected edge fabrics. If no operands are specified, this command displays the usage. By default, this feature is disabled. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: --enable Enables the ICL EX_Port bandwidth Monitor feature on an FC Router. In the enable mode, FC Router will periodically check for bandwidth imbalances from each ICL slot of FC Router to each ICL slot of neighbor switch connected through EX_Ports. A RASLog message will be generated when bandwidth imbalance is detected or resolved to other fabric. --disable Disables the ICL EX_Port bandwidth Monitor feature on an FC Router. --show Displays the current ICL EX_Port bandwidth Monitor feature status and bandwidth from each slot to connected edge fabric. --help Displays the command usage. Examples To enable ICL EX_Port bandwidth Monitor: fcr:admin> fcriclpathbwmonitor --enable ICL bandwidth balance Monitor functionality is enabled To disable ICL EX_Port bandwidth Monitor: fcr:admin> fcriclpathbwmonitor --disable ICL bandwidth balance Monitor functionality is disabled 274 Brocade Fabric OS Command Reference 53-1004112-02