Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 591

nsCamShow Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands The following operand is optional: -t Displays the device type. The device type is defined in terms of two attributes. The first attribute indicates the origination of the device as one of the following: Physical The device is connected to the NX_Port, using FLOGI to log in to the switch. Virtual The device is contrived by the switch. NPV The device is connected to the NX_Port, using FDISC to log in to the switch. iSCSI Device is connected to the iSCSI port. iSCSI The second attribute indicates the role of the device. Valid role attributes include the following: Unknown (initiator/target) Device role is not detected Initiator An iSCSI initiator. Target An iSCSI target. Initiator+Target Both an iSCSI initiator and an iSCSI target. Examples To display all switch and device entries discovered by the Name Server in the fabric: switch:user> nscamshow nscam show for remote switches: Switch entry for 92 state rev owner cap_available known v640 0xfffc23 1 Device list: count 8 Type Pid COS PortName NodeName N 5c1000; 3;23:06:00:05:1e:53:e3:8a;50:00:51:e5:3e:38:a0:06; FC4s: FCP PortSymb: [45] "Brocade VDPC Entity-Slot#00,DPC#00,Entity#03." Fabric Port Name: 20:10:00:05:1e:53:e3:8a Permanent Port Name: 23:06:00:05:1e:53:e3:8a Port Index: 16 Share Area: No Device Shared in Other AD: No Redirect: No Partial: No N 5c1200;3;23:04:00:05:1e:53:e3:8a;50:00:51:e5:3e:38:a0:04; FC4s: FCP Brocade Fabric OS Command Reference 567 53-1004112-02