Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 93
Device Authentication Policy: OFF, Switch Authentication Policy: PASSIVE
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
authUtil To enable sha1 hash type: switch:admin> authutil --set -h sha1 Hash is set to sha1. To enable all hash types: switch:admin> authutil --set -h all Hash is set to sha256,sha1,md5. To check the hash types set: switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha256,sha1,md5 1 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF To enable Sha256 hash type: sha256 hash type is recommended for FIPS configuration. switch:admin> authutil --set -h sha256 Hash is set to sha256. switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha256 1 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF To set DH group 3: switch:admin> authutil --set -g 3 DH Group was set to 3. To set all DH groups to be specified in the authentication negotiation in the order of 0, 1, 2, 3, and 4: switch:admin> authutil --set -g "*" DH Group is set to 0,1,2,3,4 To set the Switch policy to active mode: switch:admin> authutil --policy -sw active Warning: Activating the authentication policy requires either DH-CHAP secrets or PKI certificates depending on the protocol selected. Otherwise, ISLs will be segmented during next E-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Auth Policy is set to ACTIVE Brocade Fabric OS Command Reference 69 53-1004112-02