Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1153
Specify a remote domain in the fabric for which routing information is to be displayed.
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1153 highlights
uRouteShow Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the input port whose routes are displayed, followed by a slash (/). port Specify the number of the input port whose routes are to be displayed, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if omitted, the command displays routing information for all input ports in the switch. domain Specify a remote domain in the fabric for which routing information is to be displayed. This operand is optional; if omitted, the routing information for all domains in the fabric is displayed. Examples To display the routing information of all the active ports: switch:admin> urouteshow Local Domain ID: 3 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 0 1 11 1000 1 D 1,0 Type to continue, Q to stop: 11 2 0 1500 2 D 4,0 Type to continue, Q to stop: 4 0 500 1 D 4,0 16 1 27 1000 1 D 1,1 Type to continue, Q to stop: 27 2 16 1500 2 D 4,16 SEE ALSO To display the routing information of port 11 to domain 4 only: switch:admin> urouteshow 1/11, 4 Local Domain ID: 3 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 11 4 16 500 1 D 4,16 portRouteShow, topologyShow Brocade Fabric OS Command Reference 1129 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/1153.png)