Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 383

flow -enable_wrap -disable_wrap The following operands are specific to the flow mirror feature. You can use these operands only if the Flow Mirror feature is not activated for a flow. The flow name is not required for enabling or disabling this option. Enables the wrapping of mirrored frame logs. This is the default value. The Flow Mirror flow must be deactivated before using this command. The statistics of the Flow Mirror flow are reset during this operation. Disables the wrapping of mirrored frame logs. The Flow Mirror flow must be deactivated before using this command. The statistics of the Flow Mirror flow are reset during this operation. Examples Function To change the device addressing mode to WWN: switch:admin> flow --control -deviceidmode wwn To change the port addressing mode to index: switch:admin> flow --control -portidmode index To configure the ports from 1 to 40 in slot 1 as SIM port: switch:admin> flow --control -simport 1/1-40 -enable To remove the SIM port configuration on port 20 in slot 1: switch:admin> flow --control -simport 1/20 -disable To modify the size and pattern for a flow: switch:admin> flow --control myflow2 -feature generator -size 100 -pattern "1234" To disable wrapping of frame logs for the Flow Mirror feature: switch:admin> flow --control -feature mirror -disable_wrap Modifying definition of Analytics vTap flow Synopsis flow --modify flow_name port_options Description Use this command to modify the existing flow definition of the predefined flow "sys_analytics_vtap" and specify either a single port, a MAPS logical port group name, or a wildcard (*) as ingress port. You can also override the default mirror port by using the --mirrorport port option. Operands The --modify command has the following operands: flow_name Specifies the name of the Analytics vTap flow. Valid option is sys_analytics_vtap. The sys_analytics_vtap flow is used to mirror frames to a port on a remote domain, which is in IO Analyzer Mode. The flow can be modified only if it is in the deactive state. Brocade Fabric OS Command Reference 359 53-1004112-02