Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 405

frameLog SFID Source Fabric ID DFID Destination Fabric ID Type Reason for the frame discard. Frames can be discarded for a variety of reasons. The discard reasons currently handled by the frame log are timeout, unroute, and du. Count The number of discarded frames logged in the frame log that have the log timestamp, TX port, RX port, SID, DID, SFID and DFID values listed on this line of output. Note that this count may be less than the actual number of such frames discarded, because the frame log cannot log the details of all discarded frames. When viewed in dump mode, the frame log displays the following information: Log timestamp The date and time when the frames described in this line of output were discarded. TX port Egress port where the frames were bound to exit the chassis. A port displayed as -1 (or -1/-1 on slot-based systems) indicates an internal port. RX port Ingress port where the frames were bound to enter the chassis. A port displayed as -1 (or -1/-1 on slot-based systems indicates an internal port. Type Reason for the frame discard. Frames can be discarded for a variety of reasons. The discard reasons currently handled by the frame log are timeout, unroute, and du. Frame contents The first 64 bytes of the frame contents in hexadecimal format. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. The Frame Log operation is chassis-wide. Operands This command has the following operands: --disable Disables logging of discarded frames, which is enabled by default. This command clears the history of discarded frames and gathering of new information ceases. When frame logging is disabled, only the --help and --enable operations are permitted. -type timeout | du | unroute Specifies the discard frame types to disable. Specify timeout for timeout discard frames, du for destination unreachable frames, and unroute for unroutable frames. --enable Enables logging of discarded frames after the feature was disabled. Brocade Fabric OS Command Reference 381 53-1004112-02