Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 523
change, newfid, force, provision, the FID, switch role
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 523 highlights
lsCfg --change Changes the fabric ID of a logical switch, creates a base logical switch out of an existing logical switch, or removes base switch properties. The -newfid and -base operands are exclusive and may not be combined. The following operands are supported: FID Specifies the Fabric ID of the logical switch. This operand is required. -n | -newfid FID Changes the fabric ID of an existing logical switch. This command effectively removes the logical switch from a given logical fabric and makes it part of another logical fabric. -b | -base Turns an existing logical switch into a base switch. When this command is issued on a switch that is already a base switch, this command removes the base switch properties. This command disables the current logical switch. After making the change, you must re-enable the switch. -f | -force Executes the command without confirmation. This operand is optional. --show Displays the partition configuration on a switch or chassis. Without any operands, the command displays all logical switches and the FC ports assigned to them. For each switch, the FID, switch role, and domain ID are displayed: base switch (bs) or default switch (ds). The following operands are optional with the --show option. -ge Displays partition configuration information for GbE ports. This operand is valid only on the Brocade FX8-24 platform. -provision Displays the partition configuration for all slots, regardless of the slot's status. This operand is valid only on a chassis and can be used with or without the -ge option. -n | -name Displays fabric ID, switch type, domain ID, switch name, and fabric name of the logical switch. This operand can be used with the -n or -name option. --help Displays the command usage. Examples To create a base switch: switch:admin> lscfg --create 1 -base Creation of a base switch requires that the proposed new base switch on this system be disabled. Would you like to continue [y/n]?: y About to create switch with fid=1. Please wait... Switch successfully created. Logical Switch has been created with default configurations. Please configure the Logical Switch with appropriate switch and protocol settings before activating the Logical Switch. Brocade Fabric OS Command Reference 499 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/523.png)