Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 751

portCfgShow AL_PA Offset 13 Trunk Port Long Distance LE LD LS VC Link Init Desired Distance Reserved Buffers Locked L_Port Locked G_Port Disabled E_Port ISL R_RDY Mode Displays (..) or OFF when the arbitrated loop physical address (AL_PA) on the port is configured to use a 0x0 AL_PA address (default). Displays ON when the address configuration is 0x13 AL_PA. This value is set by the portCfgAlpa command. Displays ON when port is set for trunking. Displays (..) or OFF when trunking is disabled on the port. This value is set by the portCfgTrunkPort command. Displays (..) or OFF when long distance mode is off; otherwise, displays long distance levels. This value is set by the portCfgLongDistance command. Values are as follows: The link is up to 10 km. The distance is determined dynamically. The distance is determined statically by user input. Displays (..) or OFF when the long distance link initialization option is turned off. Displays ON when it is turned on for long distance mode. This value is set by the portCfgLongDistance command. Displays the desired distance of the port. This field is displayed only when portCfgShow is executed for a single port and would only display for LS and LD long distance mode. Displays the reserved buffers for the port. This field is displayed only when portCfgShow is executed for a single port and would only display for LS and LD long distance mode. Displays ON when the port is locked to L_Port only. Displays (..) or OFF when L_Port lock mode is disabled and the port behaves as a U_Port). This value is set by the portCfgLport command. Displays ON when the port is locked to G_Port only. Displays (..) or OFF when G_Port lock mode is disabled and the port behaves as a U_Port. This value is set by the portCfgGport command. Displays ON when the port is not allowed to be an E_Port. Displays (..) or OFF when the port is allowed to function as an E_Port. This value is set by the portCfgEport command. Displays ON when ISL R_RDY mode is enabled on the port. Displays (..) or OFF when ISL R_RDY mode is disabled. This value is set by the portCfgISLMode command. Brocade Fabric OS Command Reference 727 53-1004112-02